Magnum Group > Rotary Cap Compression Moulding Machine

Rotary Cap Compression Moulding Machine

Quality of cap produced on Rotary Hydraulic Compression Machine has received wide acceptance from customers because of its quality and finish and has fetched a higher selling price then the ones produced using Injection Moulding process. The consistency in quality, fast cycle time and low cost of production have given this technology all the advantage.

The process involve continuous extrusion of plastic at the tip of extruder from where the take up unit cutter lifts the material and drops in the cavity of the mould and the Rotary movement of Mould wheel keep the production process continuous and cyclic and the revolution of the wheel is the time taken for the cap to take shape, cool and get ejected before starting the next cycle.

Rotary Cap Compression Moulding Machine : Advantages

No Gate point
Better Aesthetic Look
High Finish
Continous Process
Low Energy Requirement & Cost
Low Rejection
Low Mould Investment
Ease of Printing

No Micro Holes
Higher Productivity
Higher Weight Consistency
No Colour Streaks
Low Production Cost
Low Melt Temperature
Less Scrap
Less Wear & tear

Machine Description	Rotary Cap Compression Machine
General
Mould Cavitation	Cavitation	18	24
Production Capacity	Pcs/Hr.	17,000-18000	23,000-24000
Cap Diameter	mm	20-42	20-42
Cap Height	mm	10-30	10-30

Eletrical Requirement
Motor for Rotor	KW	1.50	2.20
Motor for Hydraulic Pump	KW	18.50	22.00
Extruder Motor	KW	7.50	7.50
Heater	KW	18.00	20.00
Folding Machine Motor	KW	1.50	1.50
Slitting Machine Motor	KW	0.75	0.75
Est Connected Load	KW	66.00	73.00
Voltage Frequency	Volts/Hz	440/50	440/50

Other
Air Consumption Compressor	cfm/Bar/KW	49/8/11	49/8/11
Main Machine Dimension	mm	2600 x 1200 x 200	3800 x 1550 x 2100
Folding Machine Dimension	mm	1220 × 1220 × 1520	1220 × 1220 × 1520
Sitting Machine Dimension	mm	1220 × 1220 × 2130	1220 × 1220 × 2130
Machine Weight	Ton	3.1	5

Magnum Group

PET Preform for Bottles, PET Preform for Jars, 5 Gallon or 20 Ltr. Preforms/Jars, Pharma Bottles, Single Stage PET Bottles, Double Stage PET Containers, Caps & Closures, PET Stretch Blow Moulding Machine & Rotary Cap Compression Moulding Machine